Total Solutions - Total Confidence


Quality Assurance




TEL: +1 434-293-1101     FAX: +1 866-293-1050

CODEL › Products › Stack Emissions › Integrated Systems ›

GCEM4100 Multi Channel Extractive Flue Gas Analyzer


Main Menu


Customer Support
News Room
Contact Us

Product Enquiry

Further information about the GCEM4100 can be found using the options below

Click here to download specific literature

Not working?


Click here to contact us for further information

The GCEM4100 is a hot extractive analyzer for difficult flue gas monitoring applications. It uses infrared absorption spectroscopy to measure up to seven pollutant species in a single self-contained unit. Many conventional extractive systems require the sampled gas to be cleaned and dried to a very high standard prior to analysis, invariably resulting in high maintenance costs. Such elaborate pre-conditioning is not required by the GCEM4100. Process gases are continuously drawn through a fine filtered probe installed in the flue gas and transported to the measurement chamber via a heated sample line - without further conditioning. Designed for use on gas turbines, the analyzer is MCERTS certified and satisfies QAL1 of the EU Standard EN14181 for LCPD emission limit values above 40ppm.
› Up to seven gas species › Analogue and serial digital output
› CO, CO2, NO, NO2, SO2, HCl, CH4 & H2O › Automatic calibration verification facility
› ppm, mg/m3 (measured) and mg/Nm3 (normalized) › Over five years data logging via PC software package
› Real-time normalization for STP and H2O › Full zero and span verification using audit gases
› Full range of outputs and alarms › MCERTS certified instrument - Download Certificate
GCEM4100 Flue Gas Analyzer  
Left image is  the analyzer cabinet and right image is the air condition enclosure.

Emission Gas Monitoring | Road Tunnel Monitoring | Instrument Servicing | Multi-channel In-situ Flue Gas Analyzer | Gas Analyzer | Pollution Monitoring | Tunnel Sensor Air Quality Monitors
Copyright© 2009 CODEL International INC